Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IDSM version 3.0

Dear all,

Our company has installed a IDSM version 2.5. My company is outside US. Could anyone tell me that where the latest version 3.0 can be download ?

Thanks,

3 REPLIES
New Member

Re: IDSM version 3.0

You should be able to download the new version from the software centre if you have a CCO login.

Cisco Employee

Re: IDSM version 3.0

Be aware that the 3.0 version for the IDSM contains 3DES encryption for an SSH client used when shunning on Pix FireWalls.

Because of inclusion of the SSH client the 3.0 software is under export control. You will need to apply for access to the 3.0 software. The form you need to fill in will pop up when you select the link to download the software.

You should have access to the 3.0 version if you have purchased the support contract for the IDSM.

Download Site:

http://www.cisco.com/kobayashi/sw-center/ciscosecure/ids.shtml

Select the link:

Catalyst 6000 IDS Module Software

Strong Cryptographic (3DES) Base Software

New Member

Re: IDSM version 3.0

also, not alot of support on how to do the upgrade, this might help.

<--begin pasted doc>

Upgrading IDSM 2.5 to 3.0

STEP 1 Download all IDSMk9 files for 3.0.1-S4 to an FTP server or Unix machine

http://www.cisco.com/cgi-bin/tablebuild.pl/ids30-cat6000

Console or Telnet to the Switch

cat6509 (enable) session 5

Trying IDS-5...

Connected to IDS-5.

Escape character is '^]'.

login: ciscoids

Password: attack (default password)

Sensor23# show version

!

Sensor version is : 2.5(1)S2a

!

Sensor application status:

nr.postofficed running

nr.fileXferd running

nr.loggerd running

nr.packetd running

nr.sapd running

Configuration last modified Wed Oct 10 02:52:34 2001

Sensor:

IP Address: 172.16.171.30

Netmask: 255.255.255.192

Default Gateway: 172.16.171.1

Host Name: Sensor30

Host ID: 30

Host Port: 45000

Organization Name: cisco

Organization ID: 100

--MORE--

Sensor30# exit

cat6509 (enable) reset 5 hdd:2 <<< gets you into maintenance mode

Module 5 shut down in progress, please don't remove module until shutdown completed.

cat6509 (enable) 2001 Oct 19 04:33:24 %SYS-5-SPAN_CFGSTATECHG:local span session inactive for destination port 5/1

Module 5 shutdown completed. Module resetting...

2001 Oct 19 04:33:32 %SYS-5-MOD_RESET:Module 5 reset from Software

cat6509 (enable) session 5

Trying IDS-5...

Connected to IDS-5.

Escape character is '^]'.

2001 Oct 19 04:36:35 %SYS-5-SPAN_CFGSTATECHG:local span session active for destination port 5/1

login: ciscoids

Password: attack (default)

maintenance#

maintenance# diagnostics

maintenance(diag)# ids-installer netconfig /configure /ip=172.16.171.30 (use IDSM ip address) /subnet=255.255.255.192 /gw=172.16.171.1

STATUS: Network parameters for the config port have been configured!

NOTE: Reset the module for the changes to take effect!

maintenance(diag)# exit

maintenance# exit

cat6509 (enable) reset 5 hdd:2

cat6509 (enable) session 5

Trying IDS-5...

Connected to IDS-5.

Escape character is '^]'.

login: ciscoids

Password: attack (default)

Cat6509 (enable) session 5

maintenance#

maintenance# diagnostics

maintenance(diag)#

maintenance(diag)# ids-installer system /nw /install /server=171.69.88.133 /user=ovanjara /save=yes

/dir='/home/ovanjara' /prefix=IDSMk9-a-3.0-1-S4

***Note: if the files are in the FTP root directory, simply identify the /dir as: /dir=’\’

Please enter login password: ************ (for FTP server)

Downloading the image.. File 01 of 05

Downloading the image.. File 02 of 05

Downloading the image.. File 03 of 05

Downloading the image.. File 04 of 05

Downloading the image.. File 05 of 05

FTP STATUS: Installation files have been downloaded successfully!

Validating integrity of the image... PASSED!

Formatting drive C:\....

Verifying 4016M

Format completed successfully.

4211310592 bytes total disk space.

4206780416 bytes available on disk.

Volume Serial Number is 94D2-3FDF

Extracting the image...

############################################################################################################################################################################################################################################################################################################################################################################################################################

STATUS: Image has been successfully installed on drive C:\!

maintenance(diag)#

maintenance(diag)# exit

cat6509 (enable) reset 5 hdd:1

cat6509 (enable) session 5

Trying IDS-5...

Connected to IDS-5.

Escape character is '^]'.

login: ciscoids

Password: attack (default)

Cat6509 (enable) session 5

# setup

Sensor:

IP Address: 172.16.171.30

Netmask: 255.255.255.192

Default Gateway: 172.16.171.1

Host Name: Sensor30

Host ID: 30

Host Port: 45000

Organization Name: cisco

Organization ID: 100

Director:

IP Address: 171.69.88.133

Host Name: ZEUS

Host ID: 10

Host Port: 45000

Heart Beat Interval (secs): 5

Organization Name: cisco

Organization ID: 100

(restart IDSM)

cat6509 (enable) session 5

Trying IDS-5...

Connected to IDS-5.

Escape character is '^]'.

login: ciscoids

Password: attack (default password)

Sensor23# show version (should be 3.0)

Sensor23#

STEP 2 Apply Service Pack IDSMk9-sp-3.0-2-S4.exe

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_2/13074_02.htm#42232

Sensor23(config)# apply ftp://ovanjara@171.69.88.133/home/ovanjara IDSMk9-sp-3.0-2-S4.exe

STEP 3 Apply Signature Update IDSMk9-sig-3.0-2-S10

Sensor23(config)# apply ftp://ovanjara@171.69.88.133/home/ovanjara IDSMk9-sp-3.0-2-S4.exe

======================================================

YOU ARE DONE UPGRADING THE IDSM

======================================================

<--end pasted doc>

104
Views
0
Helpful
3
Replies