In the IDS Device Manager > Administration > System Information > it will display information about the IDS which included (Application Partition, General Statistics, Network Statistics and NTP). What I am looking for is WHAT the file name that holds all this information? And WHERE it is reside at the IDS sensor (4210)? Any Idea!!!
This information is pulled by IDM when you select the option. So there is not a single file on the system itself that contains this information, it is dynamically built in the memmory space of IDM and sent through the web browser.
If there is a specific piece of the information you are interested in, then I might be able to tell you what file IDM is pulling that one piece of information from.
thank you, What I am looking for is add more information to about the sensor configuration and also the Serial Number of the device. Basically, I would like to be able to include as much information as I can about the IDS sensor and display it through the IDM.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...