Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS EzVPN Client NAT/Access Issue

Guys,

Following is the scenario:

EZVPN-SERVER----->3745(EZVPNCLIENT)-----RADIO LINK -----> HOST

80.x.x.x--->202.x.x.x/10.1.10.x---->10.73.1.0/24

A 3745 is connecting to a PIX 515 using IOS EzVPN client. The internal interface on 3745 have 10.1.10.x IP , and anothe facility is connected via Radio link to 3745 having IP addresses in 10.73.1.0/24

Now when i connect successfully to EzVPN Server , only 10.1.10.0/24 hosts/routers are able to reach the VPN subnet , while 10.73.1.0/24 never is able to use VPN.

All routing/revert routing is fine, have duoble checked --- seems like only connected subnet can use VPN Subnet

Configuration is following:

crypto ipsec client ezvpn ez

connect manual

group trgvpn key xxxx

local-address Serial0/3/0:1

mode client

peer x.x.x.x

xauth userid mode interactive

1 REPLY
Bronze

Re: IOS EzVPN Client NAT/Access Issue

129
Views
0
Helpful
1
Replies