Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS FW available in cat4000

Hello,

I need to run IOS FW on cat4000-sup3.

Do you know if it is possible and what last IOS version/release is?

Thanks.

Stephane

#sh vers

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(11b)EW, E

ARLY DEPLOYMENT RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Tue 14-May-02 13:31 by hqluong

Image text-base: 0x00000000, data-base: 0x00B1C1F8

ROM: 12.1(11br)EW

espwarsw1 uptime is 7 weeks, 4 days, 11 hours, 28 minutes

System returned to ROM by reload

System restarted at 03:22:30 UTC Fri Dec 27 2002

System image file is "bootflash:cat4000-is-mz.121-11b.EW.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX061600ZK

Last reset from Reload

48 FastEthernet/IEEE 802.3 interface(s)

50 Gigabit Ethernet/IEEE 802.3 interface(s)

467K bytes of non-volatile configuration memory.

Configuration register is 0x2102

#sh mod

Mod Ports Card Type Model Serial No.

----+-----+--------------------------------------+-----------------+-----------

1 2 1000BaseX (GBIC) Supervisor Module WS-X4014 JAB061408T3

2 48 10/100/1000BaseTX (RJ45) WS-X4448-GB-RJ45 JAB06060825

3 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE04231BES

M MAC addresses Hw Fw Sw Status

--+--------------------------------+---+------------+----------------+---------

1 0009.7ca3.f200 to 0009.7ca3.f5ff 1.3 12.1(11br)EW 12.1(11b)EW, EAR Ok

2 0005.5fa4.1be0 to 0005.5fa4.1c0f 1.0 Ok

3 0002.4b81.1e80 to 0002.4b81.1eaf 2.3 Ok

1 REPLY
Silver

Re: IOS FW available in cat4000

http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?get_crypto=&data_from=&hardware_name=CAT4000-SUP3&software_name=&release_name=&majorRel=12.1&state=:HW&type=

The IOS upgrade planner is a great tool for this - tell it what device, and it gives you options. It also will tell you what ram and flash are required, which can be an issue for access routers.

122
Views
0
Helpful
1
Replies