Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS fw (CBAC) and IOS

7 REPLIES

Re: IOS fw (CBAC) and IOS

Hi Abdel

Are you trying to get the comparison between normal ios set feature and ios fw set ?

whatz your exact query over here ?

regds

New Member

Re: IOS fw (CBAC) and IOS

I want to get some hands on pactice on a cisco 2610 router with 12.2(4)T1, but it does not recognize "ip inspect command", my question is: does this IOS version support this command or i need other version?

New Member

Re: IOS fw (CBAC) and IOS

hi abel it's ur router is not a xm series then it will not support 12.4 ios. if u want to check the inspect commands u need to have a secure ios with firewall feature set and if u want to test ipsec also then u need ipsec feature set also. see ya

sebastan

New Member

Re: IOS fw (CBAC) and IOS

do you mean that i will never be able to practice any security features at all no matter what ios installed on it?

Re: IOS fw (CBAC) and IOS

hi

Need more inputs like the exact model of the chassis you have in place either XM series or normal plain series also the current ios code and the feature you are runnning in that.

You can check out for the possible ios support from the software advisor tool which can help u out to get the exact ios code with the reqd feature set to have CBAC configured in your router..

As per the datasheet its simply mentioned that 2600 does support CBAC feature conditioned to your ios code supporting ADVsecurity feature set.

http://cisco.com/en/US/products/hw/routers/ps259/products_data_sheet0900aecd800fa5be.html

you can check the software adviosr tool from here..

http://www.cisco.com/pcgi-bin/Support/CompNav/Index.pl

regds

New Member

Re: IOS fw (CBAC) and IOS

Here is the "sh ver" output

--------------

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.2(4)T1, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 25-Oct-01 19:25 by ccai

Image text-base: 0x80008088, data-base: 0x80A34C28

cisco 2610 (MPC860) processor (revision 0x300) with 28672K/4096K bytes of memory

.

Processor board ID JAD05460RQU (3364271967)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Re: IOS fw (CBAC) and IOS

hi

I dont think any of the 2610 router supports CBAC,i did a try in S/W advisor for a suitable ios code but couldnt get this feature for 2610.

regds

182
Views
0
Helpful
7
Replies
CreatePlease login to create content