Just wondering, i have this VPN client 3.0 connection to one of my router, which going through an ACS server for authentication and accounting, somehow, i cannot see the accounting information from the ACS server, and the following is my config, i don't know if anything missing, i would appreciate if anyone could give me a hint. I'm sure the ACS server is running fine, Authentication is good, and Accounting for some other connection is working fine, just Accounting for my VPN router connection.
aaa authentication login user-test group tacacs+
aaa authentication ppp default group radius local
aaa authorization network default group radius if-authenticated
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...