05-20-2002 10:26 PM - edited 03-08-2019 10:42 PM
Hi i need your help
i need to configure a networking sistem
i have 2 lines one will be a 768 andthe another will be
a E1 connection.
i m in Costa Rican our line expecification is DSU.
i need a call center with ip telephony
i thing in a router 3640 with one w.i.c for the 768 connection
and v.w.i.c for the E1.
we need 30 operator i saw that v.w.i.c have connection for 60
VoIP.
I will connect the E1 to the router later make connection betweeen
the router and the switch and finally connect each port on the
switch to the IP phone mabe 7710
i dont know if i need a wire between the switch and the IP phone
or i need a wire between the switch a the computer and later from the
computer to the phone.
this is the correct hardware ?
1 router 3640
2 switch
1 wic card (for DSU) this is the E1 a have to specificate something?
1 vwic car (voice wan internet card) what type(model) for 50 lines?
1 PIX software for firewall (the 3640 support that?) or what you recomendate me?
1 ac power
50 IP phone 7710 (operator) is the correct model?
2 IP phone 7750 (admin) is the correct model?
and please tellmewhat i need? may be i forgote something?
can you recomend me something?
what i need to programming the router
can you make a schematic exmaple withthis?
how configure the prix firewall?
can you send me a example to the configuration tool
with number parts and names (allabout that)
05-28-2002 05:35 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide