Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Highlighted
New Member

IPSEC and NAT

I want to setup site-to-site VPN IPsec tunnel to my customer.

I have PIX 506E v6.2. Behind this PIX there is a private network 10.80.100.0 with FTP server 10.80.100.14

My customer wants to ftp to this server but he wants to see it as public registered IP address. How can I do it?

Any suggestions how to setup site-to-site VPN and use public IP address for my FTP server.

Customer uses Checkpoint 4.1 as a VPN gateway.

1 REPLY
Bronze

Re: IPSEC and NAT

You can do a static NAT for that host IP address on the PIX.May be this configuration example will give you some idea

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml

96
Views
0
Helpful
1
Replies
CreatePlease login to create content