IPSEC and NAT

[ziby]

I want to setup site-to-site VPN IPsec tunnel to my customer.

I have PIX 506E v6.2. Behind this PIX there is a private network 10.80.100.0 with FTP server 10.80.100.14

My customer wants to ftp to this server but he wants to see it as public registered IP address. How can I do it?

Any suggestions how to setup site-to-site VPN and use public IP address for my FTP server.

Customer uses Checkpoint 4.1 as a VPN gateway.

[pradeepde]

You can do a static NAT for that host IP address on the PIX.May be this configuration example will give you some idea

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml