06-04-2006 08:44 AM - edited 02-21-2020 02:27 PM
I have 2 Cisco 2651 and I'm trying to configure a IPsec tunnel between them, but when I try to use the command crypto in the configure terminal doesn´t exists, Is not possible by default the configuration of IPsec in all the routers? Do I need a license or something like that? How can I know if my router support IPsec? I have Cisco IOS 12.4
regards
06-07-2006 12:59 AM
Hi
The ios which you are trying may be of simple IP Base code which you need to upgrade to have crypto support in your box...
do paste the output of show version here so tht the exact feature set of the ios code can be found..
regds
06-07-2006 04:49 AM
This is my output in show version:
PruebasVoIP#show version
Cisco IOS Software, C2600 Software (C2600-JSX-M), Version 12.4(1), RELEASE SOFTW
ARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 29-Apr-05 16:28 by hqluong
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
PruebasVoIP uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:c2600-jsx-mz.124-1.bin"
Cisco 2651XM (MPC860P) processor (revision 0x400) with 253952K/8192K bytes of me
mory.
Processor board ID JHY0904K0YP (2075692498)
M860 processor: part number 5, mask 2
1 Ethernet interface
2 FastEthernet interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Which version have I to upgrade, this router is used for me as a call manager express
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide