Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ipsec-manual (without IKE on PIX 501)

I would like to estabilish a SA without IKE.

When I try the commands on the console:

ciscopix(config)# crypto map netcampus 10 ipsec-manual

ipsec-manual mode is not allowed in this PIX.

Type help or '?' for a list of available commands.

My PIX is a 501 with 6.1(2) , 50 users + 3des.

I haven't found references about this problem in the docs.

Any hints ?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ipsec-manual (without IKE on PIX 501)

IPSec-manual is not available in the 501, only in the 506 and upwards.

1 REPLY
Cisco Employee

Re: ipsec-manual (without IKE on PIX 501)

IPSec-manual is not available in the 501, only in the 506 and upwards.

135
Views
0
Helpful
1
Replies
CreatePlease to create content