I'm trying to configure a IPSec Tunnel Between Windows 2000 & PIX 6.3 since last week. Am following cisco document http://www.cisco.com/warp/public/707/2000.html#tpix and it just doesn't work. On the PIX debug crypto isakmp doesn't return anything, so I assume there is something wrong with Win2K Config. Pl. let me know if somebody has some tips.
You did not mention if you are using some DHCP server. In case you are using and if it is ver 6.3, I have something to bring to your notice. In ver 6.2 or less , dhcpd enable command would only accept the inside interface as an argument. But in 6.3, PIX Firewall versions 6.3 and later do not have this restriction. However, Firewall MC only allows you to enable the DHCP server on the inside interface. Importing the dhcp enable command on another interface causes an error.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...