I've a pix 515 firewall and i have configured VPN client on it.Later i configured IPsec to a checkpoint NG and iam able to reach the internal segment behind the NG from te pix, but i am not able to reach their segment from my internal segment. i used the following config
access-list 110 permit ip 172.16.0.0 255.255.0.0 10.0.0.0 255.192.0.0
access-list 115 permit ip 172.16.0.0 255.255.0.0 10.0.0.0 255.192.0.0
iam able to reach destination Inside segment from my LAN, only after removing the client authenication through RADIUS which is meant for VPN Client , Is there any way to use RADIUS & IPSEC tunnel for this senario simultaniously..Please Help ! ! !
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...