Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IPSEC VPN with Pix 501

I setup ipsec vpn on a 501.

I can connect ok but cant ping anything on the inside

here is the config anyone got any ideas as to what i am doing wrong

I got this working before this box is slightly more complicated in that it also has a L2L tunnel to another site

1 REPLY
New Member

Re: IPSEC VPN with Pix 501

Hi,

Try this and see if it works.

replace

crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map_2

with

crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map

and add this

vpngroup RAS dns-server dns1 dns2

dns1 and dns2 will be the dns you use. I know the dns might not matter, but there's no harm in trying.

D

233
Views
0
Helpful
1
Replies