I hope someone can help me with my problem. I can't seem to get a Windows 2000 client talking to a 3620 router over IPSec. I have cut and pasted the debug from the router below. When I ping the router's internal address the IPSec tried to establish but can't. I used the documents from Microsoft and Cisco to get this working with no luck. I also include the Router config below.
Version 12.1(17). Is there something blindingly obvious I'm missing?
crypto isakmp policy 1
crypto isakmp policy 2
crypto isakmp key cisco123 address 0.0.0.0
crypto isakmp client configuration address-pool local vpn-pool
it means that you *do not* have proper proxy IDs with masks, proxy ID is the Local subnet(s)/host(s) across the vpn connection, so make sure that you use 192.168.1.0/24 as the remote subnet, other things to be taken care of:
1 - Make sure that you bypass NAT (static and PAT) for IPSec data flow
2 - Remove crypto map from e0/0 interface, you only need on the outside (s0/0) interface.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...