In order to establish a IPsec session between Cisco VPN client and PIX, what are the protocols which should be allowed on a router sitting in between them. As due to access list on the router my client is not able to establish IPsec with PIX.
Cisco VPN client encapsulates packets in TCP/UDP depending on the option you have selected in vpn client. On the router in between firewall and vpn client, ISAKMP and TCP (typically 10000, configurable) or UDP (typically 4500, configurable to any port in case of ASA) should be allowed in both directions
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...