Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

isdn bri interface failed to apply an access-list that configure on ACS

Hi !

I am trying to work with access-list per user on ACS and cisco 3640 with pri interface .

When i apply an access-list on the Cisco secure ACS v2.6 /user setup/Cisco IOS/PIX RADIUS Attributes/cisco-av-pair/(ip:inacl#1="permit tcp 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

Or ip:inacl=189 ), I try it under the group setup to .

The isdn bri interface failed to apply it.

The massage that i get is as fallow =

%PERUSER-3-ISDNINTF: Se0/0:16 access_group: Can not apply configuration to ISDN channel:

"ACL_No_Internet_In".

What i need to know is how can i apply an access-list that configure on the acs at the lcp stage or you can sagest me any other way .

p.s.

I know that i can not apply any configuration to isdn

interface at the negotiation stage

4 REPLIES
Silver

Re: isdn bri interface failed to apply an access-list that confi

Do you already have an access-list applied to the router that is not allowing this change? This may be too complex to troubleshoot here without configs and debugs.

New Member

Re: isdn bri interface failed to apply an access-list that confi

i resolved a problem with acl , PRI and ASC by configuring virtual-profil and interface virtual-template in cisco router 3640.

New Member

Re: isdn bri interface failed to apply an access-list that confi

I have used ACL's in Cisco Secure before mostly as a group setting. It looks to me that all you need to do is remove the "ip:" from the acl. HTH

New Member

Re: isdn bri interface failed to apply an access-list that confi

Hi !

thank you very much for you're help

133
Views
0
Helpful
4
Replies
CreatePlease to create content