Hi I have a ASA that I'm trying to setup a VPN for roaming clients on and have them access the network. Right now I get issues with No translation group found and no matter what I do it doesn't seem to fix the problem. Attached is my current config if anyone thinks they can help.
Thanks, that's what I thought. I thought I had tried that and it turns out that its mostly an issue with the default route on the server I was attempting to connect to.
However while it works I still have the errors appearing in the ASDM log except they have the clients internal ip (it is behind a NAT device) and then the destination. It appears to work fine however so I'm not sure if those are important?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...