Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LAN has 2 firewall.VPN client issue

Lan=192.168.2.0/24

Checkpoint 192.168.2.1 and this is default GW for LAN

ASA=192.168.2.125 - This is configured for Cisco VPN client (Future it may be site to site VPN)

LAN---------Checkpoint------Router1-------ISP1

----------ASA---------------Router2-------ISP2

Cisco client IP pool is 10.1.10.0/24

Check point is configured to redirect any traffic for 10.1.10.0/24 to ASA

Once the VPN client is establish Client cannot pint internal address where as internal can ping client IP.

If i change LAN PCs GW to ASA every thing is OK

That means it only work one way...where do u think i made a mistake ?

1 REPLY
Silver

Re: LAN has 2 firewall.VPN client issue

Once the VPN is established all traffic will be routed through the VPN tunnel . Client might have a different ip address for VPN tunnel. So only ASA to which the VPN tunnel is established will be reachable.

100
Views
0
Helpful
1
Replies