I have a pix 501 in a remote office that has a lan to lan tunnel connected to our main office. The problem is that I cant map a drive to a server that is located on the public side of the concentrator 199.x.x.x. I can do anything I want from the 10.2.0.0 remote office to servers that are in the 10.1.1.0 main office. But for some reason it seems that the public interface will not allow netbios to pass. The publc interface is also on the 199.x.x.x network. Do I have to do something with the public filter? Ive seen something in the forums about having a static address for the machine on the inside to map to the DMZ, but I only have one IP address to use for the public interface of the PIX, so I cant do that.
Yes it is, but its firewalled at the serial interface outside to let only port 80 through, because its a web server. The thing is, the server is on the same subnet as the public interface of the concentrator, so if it was a workstation, it would map just fine. Im thinking it has to do with the public default filter on the interface, but I cant seem to find any way of telling it to let netbios through. I may be completely wrong here, but I'm pretty sure its not the pix, because I can map to an internal server just fine. I even opened up the access list on the pix to "permit IP any any" just to test, and that didnt work either...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...