Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LAN to LAN problem

I am building a LAN to LAN from a cisco 3015 to a 2621. The 2621 will sit behind a firewall (one public interface and 2 private interfaces) on the far end. The 2621's public interface will have a translated address (static) from the firewall and will site on the firewalls one private interface. It's private interface will connect to a server. This server once creating traffic will create a tunnel through the 2621 and connect to a server behind the concentrator. My access-lists for IPSEC traffic will only permit traffic from the server behind the 2621 to the server behind the concentrator. What I want is to have communication from a server the other private interface of the firewall to talk to the server sitting on the private interface of the 2621 - is this possible??

Thanks in advance

1 REPLY
Cisco Employee

Re: LAN to LAN problem

Hi Rashid,

This is definately possible, Kindly review the following for more details:

http://www.cisco.com/warp/public/471/ALTIGAR.shtml

Regards,

Aamir

-=-

82
Views
0
Helpful
1
Replies