6. Cayman DSL router( no idea of the ip address, but sure its doing natting)
7. PIX 501e outside - dhcp client - 192.168.1.4
8. pix 501e inside - 10.x.x.x
9. inside netowrks 2 (10.x.x.x and 192.168.x.x)
Can i initiate a tunnel between the 2 pix, if yes my question of concern is what ip address i can give for the ipsec-isakamp peer config on the pix 506. Can i set it to 0.0.0.0 0.0.0.0 ?
I am really confused while configuring the pix 506, becasue i am not sure what ip address my pix501e will get my DSL router(since its a dsl connection). can dynamic crypto map be used ? if i use that will my tunnel come up ?
Configure PIX-501 as the easy vpn client, and pix-506 as the Easy VPN server, but as you have RFC1918(private address) on the PIX-501 outside interface, and your DSL router is doing PAT, you will need to wait till end of this month
for V6.3 OS for PIX, as it supports IPSec/UDP.
If you are DSL router can be configured for NAT(one-to-one) for PIX-501 outside IP address (you will also need an extra IP address from your Caymen DSL side), then you can follow this link to implement it.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...