09-11-2008 09:00 AM - edited 02-21-2020 03:00 AM
Hello,
My company buyed an ASA5510-sec-bun-k9
but when I do show ver I have this output : asa707-k8.bin
I am very surprised, I have to use PAK ?
or I have to upgrade the image?
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 150
This platform has an ASA 5510 Security Plus license.
Thanks
Regards
09-11-2008 09:50 AM
Enrique
I believe that you are ok and do not need to do anything. It is perhaps confusing but there appears to be a difference between k8 and k9 in the licensing (k8 gets DES but not 3DES/AES while k9 gets 3DES/AES) and you have the k9 license (since 3DES/AES is enabled). However in the software there is only the k8 image file. I checked in the software download pages on the Cisco web site and there are no k9 images listed, only k8 images.
So I believe that your company received what it purchased and there is no need to do anything special.
HTH
Rick
09-11-2008 12:55 PM
Hi Rick,
You are exactly correct. A 5 from me.
-Mike
09-18-2008 08:30 PM
Is not supposed to have 250 VPN Peers? and the interfaces should be 2GE 3 FE ?
I have the same part number as proteksa2006 with same versions OTB
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: