Our scenario is 3 offices. 1 VPN concentrator 3005, and 2 VPN clients 3002. Only 2 of the workstaions on the client sides can see everyone else on the other remote locations. The other workstations are limited to just seeing the same 2 workstations on the concentrator side. All workstations are the same WinXP SP2. All network settings are the same. "IF" I take one of the individual workstations that is having a problem and GO AROUND the client and use Microsofts PPTP VPN all is well. And accessing from anywhere using PPTP is fine, no problem. This seems soooo bizarre, please help me if you can. OHH another thing, this setup worked fine before we swapped the concentrator and one of the clients from thier locations.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...