Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Linux FC4 with Cisco VPN 4.7 - reconnect fails

I am using the std 2.6.12_1398 kernel and am finding that I am unable to get reliable connections. After a reboot, the connection to the Cisco 3000 works fine. I have turned up the logging and but there is nothing obvious. After the last line, below there is a pregnant pause and then the connection fails. Waiting a while and retrying is sometimes successful. A packet trace would suggest that no packets are actually sent to the server at this point.

14 02:08:01.150 09/15/2005 Sev=Info/4 CM/0x43100024

Attempt connection with server "202.a.b.c"

15 02:08:01.150 09/15/2005 Sev=Info/4 CVPND/0x43400019

Privilege Separation: binding to port: (500).

16 02:08:01.151 09/15/2005 Sev=Info/4 CVPND/0x43400019

Privilege Separation: binding to port: (4500).

17 02:08:01.151 09/15/2005 Sev=Info/6 IKE/0x4300003B

Attempting to establish a connection with 202.a.b.c.

1 REPLY
New Member

Re: Linux FC4 with Cisco VPN 4.7 - reconnect fails

I made the original posting from a different account.

The application I am trying to use the Cisco VPN client for is quite important, to us. At this time it is not reliable enough to use in a production environment. If there is anyone that can assist (off list) to determine why the re-connects fail, I would really appreciate it. Please contact me via email geustace@godzone.net.nz

81
Views
0
Helpful
1
Replies