Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Load VLAN's via startup config?

Can I load the 3 VLAN's I want to create on a router just by adding them to the tftp config I upload to startup? I keep getting an error.

Here is whats at the top of my tftp config file:

! ===============================================

! Company DHCP Remote Site Config Script

! Pay attention to Spaces and Non Spaces!!

! DHCP SITES MUST USE 12.4(4)4T CODE!!!!!

! ===============================================

!

vlan database

vlan 1

vlan 2

vlan 3

apply

exit

!

conf t

!

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname 1234

!

boot-start-marker

boot-end-marker

no parser cache

no service config

~snip~

2 REPLIES

Re: Load VLAN's via startup config?

Hi

Can you revert back about the router model which you are using up over there ?

Also if possible do post out the show version output taken out from the router..

regds

New Member

Re: Load VLAN's via startup config?

12.4(4)4T on Cisco 1811's

Someone sent over a note saying it will work (see below) with a "Later" version of IOS but how far up do I need to go?

conf t

vlan 1

state active

vlan 2

state active...

end

115
Views
0
Helpful
2
Replies
CreatePlease login to create content