Local pool

[sudhakar.joseph]

I have VPN 3000-clients connected to the pix 525 Ver 6.0 through vpn tunnel.I want to use Win NT for the authentication purpose for the vpn-clients accessing the private network.My question is how to direct the vpn clients to the NT server in the inside network after the vpn-clients are already authenticated at the pix (by vpngroup command).

Kindly reply me back.

[zletaief]

You should add the commands :

aaa-server group_tag protocol auth_protocol

aaa-server group_tag (if_name) host server_ip key timeout seconds

See the URL

http://www.cisco.com/warp/public/110/pixcryaaa52.shtml

[eheston]

You will need to be running NT 4 Radius (part of the NT Option Pack) or Windows 2000 IAS for this to work.