My goal ist to lock users into a VPN group which overrides the group the user has configured in the Cisco VPN Client. In this way, access restrictions can be applied to various groups configured on the ASA with the assurance that the users are locked into that group with the RADIUS server.
I have managed to sort of get it to work by ENFORCING the user to always use his profile via [3076\085] Tunnel-Group-Lock. The ultimate goal would be to REASSIGN the user to the correct group, allowing to deploy just one .pcf file.
Currently I end up with a disconnect:
"Tunnel Rejected: User (<user>) not member of group (<VPN group>), group-lock check failed".
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...