logging failed/passed attempts w/VPN Conc. and ACS

[jpoulos]

I need to view a log of all passed and failed attempts coming across my VPN Concentrator 3005. I am currently using Cisco ACS to do this for VPN through the firewall. I have setup a radius server through the ACS to authenticate the users, and activity shows up in the radius accounting, but not in the passed authentications. Also, is there any way to do it right on the concentrator. Thanks.

JP

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[scircular]

hi,

a week ago i successfully testet a setup with a 3030 (3.11) and acs 2.6(3) - but in my case i did the authentication with the tacacs-daemon. users show up in passed and failed authentication logs.

kind regards

ralf krist