Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

logging inside ip to outside ip with time stamps

I'm running a Cisco PIX and need to determine if an INSIDE IP is connecting to and OUTSIDE IP and when it occurs. I thought I could make an access-list entry with a permit and then log it. Anyone done this before?

3 REPLIES

Re: logging inside ip to outside ip with time stamps

yeah.. access-list with the log option is the best for such scenarios. you will clearly get the source/destination IPs for the ACLs specified on the PIX.

Raj

New Member

Re: logging inside ip to outside ip with time stamps

Thanks for the response. I set it up to log at level 1 so as to avoid a bunch of other stuff from cluttering up the output. If I go for the packet specific info, I'll use the "capture" command or put a sniffer on the segment. Thanks again for the help.

Re: logging inside ip to outside ip with time stamps

Yeah .. that sounds fine. please mark the post as solved, which could be helpful to others.... rate replies if found useful.

All the best...

Raj

108
Views
0
Helpful
3
Replies
CreatePlease to create content