Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Logging IP access on a PIX 515E with 6.2(2)

Sorry, I did not find this in a search. I need to figure out how to log what IPs access specific host only. I have a PIX 515E running 6.2(2) and no other devices to use for this - no router, etc., nor do we run any auth servers. I've used the 'log' parameter on router ACLs many times but don't see that in this version of PIX. Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Logging IP access on a PIX 515E with 6.2(2)

Hi Brian,

The logging facility for PIX ACLs was not introduced until release 6.3. THe following link has some info on it:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/63rnotes/pixrn63.htm#wp68356

I'm afraid you'll have to upgrade to get this functionality.

Hope that helps - pls rate the post if it does.

Paresh

3 REPLIES
New Member

Re: Logging IP access on a PIX 515E with 6.2(2)

PIX ACL's support 'log' action as well; you need to tune it accoring to your requiremnet (add to permit statements)

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080450bf0.html#wp1061635

New Member

Re: Logging IP access on a PIX 515E with 6.2(2)

I don't see that option in version 6.2(2) at least it won't let me use it in the access-list line? What am I missing.

Thank you.

Purple

Re: Logging IP access on a PIX 515E with 6.2(2)

Hi Brian,

The logging facility for PIX ACLs was not introduced until release 6.3. THe following link has some info on it:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/63rnotes/pixrn63.htm#wp68356

I'm afraid you'll have to upgrade to get this functionality.

Hope that helps - pls rate the post if it does.

Paresh

110
Views
0
Helpful
3
Replies
CreatePlease login to create content