Logging IP access on a PIX 515E with 6.2(2)

[brian.wilson]

Sorry, I did not find this in a search. I need to figure out how to log what IPs access specific host only. I have a PIX 515E running 6.2(2) and no other devices to use for this - no router, etc., nor do we run any auth servers. I've used the 'log' parameter on router ACLs many times but don't see that in this version of PIX. Thanks in advance.

[varakantam]

PIX ACL's support 'log' action as well; you need to tune it accoring to your requiremnet (add to permit statements)

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080450bf0.html#wp1061635

[brian.wilson]

I don't see that option in version 6.2(2) at least it won't let me use it in the access-list line? What am I missing.

Thank you.

[pkhatri · Accepted solution]

Hi Brian,

The logging facility for PIX ACLs was not introduced until release 6.3. THe following link has some info on it:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/63rnotes/pixrn63.htm#wp68356

I'm afraid you'll have to upgrade to get this functionality.

Hope that helps - pls rate the post if it does.

Paresh