Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Logging on to Inside network from DMZ zone

Running cisco pix 515 what would I need to put into the config to allow access from the perimeter (dmz) machines ip of 10.1.0.? subnet 255.255.255.240 to inside network of 10.0.0.? subnet 255.255.0.0 ?

1 REPLY
New Member

Re: Logging on to Inside network from DMZ zone

Without looking at the rest of your config, here’s probably what you need:

static (inside,dmz) 10.0.0.0 10.0.0.0

netmask 255.255.0.0

conduit permit tcp 10.0.0.0

255.255.0.0 any any 10.1.0.0

255.255.0.240

Or you can be more specific with your conduit(s) if you know which protocols and ports you wish to allow. Be as specific as you can.

82
Views
0
Helpful
1
Replies
CreatePlease to create content