Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Looking for feedback

I ran in to problems yesterday at a customer where I could not get any of my ACLs working correctly. Outbound Internet worked fine but nothing could come in via the ACLs. Does this config look ok? The customer has a lot of internal problems with their DNS, Routing in their network etc. etc. So I'm wondering if it has more to do with that or with the config I had running. I changed the IPs but if this isn't helpful enough please let me know. As always thanks for the help!!

1 REPLY
Gold

Re: Looking for feedback

Apart from one slight ‘typo’ on your static for POP3 – you forgot to add the protocol (TCP) on the static, it looks okay to me. Did you issue clear xlate after saving the configuration?

Can you telnet from an outside network to port (say) 25 for smtp on you public IP for mail service? Or even the other ports for your relevant services??

Have a read of the following document, which might be of help:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml

Hope this helps a little and let me know how you get on.

Jay

81
Views
0
Helpful
1
Replies
CreatePlease login to create content