Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Looking for pre-warnings -moding Inside IP addr on production PIX

Changing the Internal int IP on a PIX 515 ver 6.2 from x.x.x.1 to 192.168.1.1 to coincide with the lan... what issues should I be prepared for? Can I export the config through tftp/PDM v2, make all mods, and import?

Could I be so lucky to change the int ip and the PIX auto replicates the IP addr change in all instances of the config?

TIA....

CJ.

1 REPLY
Cisco Employee

Re: Looking for pre-warnings -moding Inside IP addr on productio

some issues to lookout for;

- make sure your LAN clients point to the NEW default gateway

- clear arp table on all devices connected on the inside LAN eg switch, router

- If using DHCP on inside, change the default gateway to the new IP address to be handed out to clients.

HTH

R/Yusuf

88
Views
0
Helpful
1
Replies