Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lossing network resources when connected to Cisco VPN

Hello,

When I connect to a PC, via CISCO VPN, I appear to loss access to;

a) my network drives

b) Internet connection.

Is this standard for CISCO VPN Connection?

Is there a way to configure it so that I can still get access to the network drive at my end?

1 REPLY
New Member

Re: Lossing network resources when connected to Cisco VPN

Been a while since I worked on VPN's but from memory you have two options

1.enable split tunneling

2.Use Local LAN access setting on the VPN Client.

Not sure of the platforms you are running however after a quick search the following links may provide you some direction.

VPN to Concentrator Split Tunneling

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34fa.shtml

VPN to Concentrator Local LAN Access

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00806f34e6.shtml

Hope this helps and is what you meant by "connect to a PC, via CISCO VPN"

Good Luck,

Justin

92
Views
0
Helpful
1
Replies