Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mail to outside address

I have two servers on the dmz interface both with static nat tranlations. One of the servers needs to send mail to the others static address because of dns lookups. Is it possible to allow this traffic in. Would this be done with the alias command.

1 REPLY
Silver

Re: mail to outside address

Are both servers off of the same pix interface? Can you diagram the topology? You cannot have the pix send traffic out the same interface on which it was received.

If the servers are on different subnets, and you are using seperate logical or physical interfaces on the pix, you can use the alias command. What may be better, is the no sysopt nodnsalias inbound/outbound command.

See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/s.htm#1026942 for deatils on the nodnsalias command.

87
Views
0
Helpful
1
Replies