09-09-2008 12:16 AM - edited 02-21-2020 03:00 AM
Hi,
I'm working with a ASA5505 NEM setup.
Everyting is working fine except accesing the device from the other side of the tunnel. From the ASA LAN i can access the device via HTTPS, Telnet and SSH, but this doesn't work comming via the tunnel. I'm running version 7.2(4).
Any idea what I'm doing wrong?
Thanks
Solved! Go to Solution.
09-09-2008 04:26 PM
There is no attachement in your post..
can you verify asa have management access :
show run | inc management
if no output from above configure asa with bellow statement, then try accessing asa via tunnel.
management-access inside
PLS rate any helpful post
Rgds
Jorge
09-09-2008 04:26 PM
There is no attachement in your post..
can you verify asa have management access :
show run | inc management
if no output from above configure asa with bellow statement, then try accessing asa via tunnel.
management-access inside
PLS rate any helpful post
Rgds
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide