Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Memory leak

Dear Forum,

I just bought the 831 Image

c831-k9o3sy6-mz.123-4.T2.bin to do DMVPN. Everything

works fine, but after one or two days the router

runs out of memory. I observed this problem with

sh proc memory and the memory is decreasing every hour a little bit more.

What can I do?

02-09-2004 20:40:14 Local7.Critical 10.7.7.254 7334: -Process= "NHRP",

ipl= 0, pid= 96

02-09-2004 20:40:14 Local7.Critical 10.7.7.254 7333:

02-09-2004 20:40:14 Local7.Critical 10.7.7.254 7332: Alternate Pool:

None Free: 0 Cause: No Alternate pool

02-09-2004 20:40:14 Local7.Critical 10.7.7.254 7331: Pool: I/O Free:

8228 Cause: Memory fragmentation

02-09-2004 20:40:14 Local7.Critical 10.7.7.254 7330: 22:56:09:

%SYS-2-MALLOCFAIL: Memory allocation of 4680 bytes failed from

0x800EEA7C, alignment 4

........

%ALIGN-3-TRACE: -Traceback= 8055CA3C 80562ABC 80563988 80563AD4

805648C4 8016B8EC 801700B8 00000000

02-09-2004 20:39:47 Local7.Error 10.7.7.254 7315: 22:55:43:

%ALIGN-3-SPURIOUS: Spurious memory access made at 0x8055CA3C reading

0x34

02-09-2004 20:39:16 Local7.Critical 10.7.7.254 7314: -Traceback=

80176C14 80177E14 800EEA80 800EEF6C 800EFC1C 800F1CC4 80562174

80562584 80563970 80563AD4 805648C4 8016B8EC 801700B8

02-09-2004 20:39:16 Local7.Critical 10.7.7.254 7313: -Process= "NHRP",

ipl= 0, pid= 96

Best,

Christian

1 REPLY
Bronze

Re: Memory leak

To troubleshoot memory related problems, you could refer to 'Troubleshooting Memory Problems' at http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6f3a.shtml.

277
Views
0
Helpful
1
Replies
CreatePlease login to create content