Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MIBs with IPSEC

Hi,

I have a router using 10+ VPNs and need to monitor when each one goes down. There was an experimental MIB : enterprises.9.10.62.1.2.3.1.1.8.7.82.111.117.116.101.114.66

The values 0 = done and 2 = up

but the versions dont seem to have this. Can anyone help?

3 REPLIES
Cisco Employee

Re: MIBs with IPSEC

hi gareth.

Could you please tell me what type of router, and what IOS version is running on it?

Also, I think the MIB locator might be useful to you:

http://tools.cisco.com/ITDIT/MIBS/servlet/index

HTH,

-Joe

New Member

Re: MIBs with IPSEC

Hi Joe

IOS is 12.3(11r)T2 and its a 3845 Router

Thanks

Gareth

Cisco Employee

Re: MIBs with IPSEC

Hi Gareth.

This mib should have what you're looking for:

CISCO-IPSEC-FLOW-MONITOR-MIB

This is the MIB object that shows the # of tunnels:

cikeGlobalActiveTunnels OBJECT-TYPE

SYNTAX Gauge32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The number of currently active IPsec Phase-1 IKE Tunnels."

::= { cikeGlobalStats 1 }

http://ftp.cisco.com/pub/mibs/v2/CISCO-IPSEC-FLOW-MONITOR-MIB.my

Using the MIB Locator tool, which you can find here:

http://tools.cisco.com/ITDIT/MIBS/servlet/index

you should see that this MIB is supported on the 3845.

HTH,

-Joe

98
Views
0
Helpful
3
Replies