My boss wants an MOTD banner on our PIX-515Es running version 6.3(3). I have put the banner in and it shows up when I do "show banner". The banner does not appear when you log on or go to "priv exec" mode. It is only displayed when you logoff. I am fairly new in this job and would really like to figure this out. Can someone help me with this? Thanks much in advance.
Thanks for you advice. I have tried using "banner login" and "banner exec" (putting in separate text for each banner). The only banner that displays is the MOTD banner and that only displays when you log off. All three banners do show up when I do a "show banner".
I think you have explained why I am not seeing it. I am looking at it from the console port of the PIX. These are on classified systems and we are not allowed to telnet into the firewall or routers. I really appreciate you taking your time to help me with this.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...