The configure net command merges the current running configuration with a TFTP configuration stored at the IP address you specify and from the file you name. If you specify both the IP address and path name in the tftp-server command, you can specify server_ip :filename as simply a colon ( : ).
factory-default - Specifies to clear the current configuration and regenerate the default, factory-loaded configuration. This command is supported for the PIX 501 and PIX 506/506E only in PIX Firewall software Version 6.2.
Please refer the URL I had posted earlier for details.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...