Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MPLS at layer 2 + Multicasting

We are in the process of designing our core, and for reasons of Multicasting, and isolation we my co worker has decided to use MPLS at a layer 2,

Overview

End users and remote sites will be VPNing into our core using DVI/VTI tunnels, after registering into our network, they will be gaining access to virtual servers running VMware. The reason for going MPLS was in order to isolate one virtual server instance from the rest of the virtual servers, for this reason my associate has decided to use MPLS at layer 2 in order to control the multicasting/uniscasting by use of labels, and making the VPNs VRF Aware. Can someone give me there recommendations

1 REPLY
Anonymous
N/A

Re: MPLS at layer 2 + Multicasting

A separate function is required to enable IP multicast over a Multiprotocol Label Switching Virtual Private Networks (MPLS VPNs) network, as MPLS has no native ability to support it,.

Refer these doc:

http://www.cisco.com/en/US/tech/tk828/tech_digest09186a00801a64a3.html#wp39226

http://www.cisco.com/en/US/products/hw/switches/ps525/products_installation_guide_chapter09186a008008036c.html#xtocid9681

156
Views
0
Helpful
1
Replies