From a routing point of view with 2 routers at each site and advertisements via BGP I don't see this being a problem. We'll advertise both networks at each site. However, primarily only site A will get 126.96.36.199 traffic and site B will get 188.8.131.52 traffic. No problems there with NAT and so forth.
What I don't know how to handle at the moment is if say site B fails and site A starts receiving 184.108.40.206 traffic. There will be just a single link between site A's router and firewall, with the 20.x.x.x network. Any recommendations how site A can receive 220.127.116.11 seamlessly if site B were to fail? (from an ASA/NAT Point of view)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...