Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

multiple static entries to same internal host?

Not sure if this is possible, but I have an internal host that needs to be accessed from the outside and from my dmz. In both cases the traffic will be initiated from the other side, not the internal host. Is this possible? My config will look something like this:

static (inside,outside) 2.2.2.2 1.1.1.1 netmask 255.255.255.255

static (inside,dmz) 3.3.3.3 1.1.1.1 netmask 255.255.255.255

access-list acl_outside permit tcp any host 2.2.2.2 eq 80

access-list acl_dmz permit tcp any host 3.3.3.3 eq 80

access-group acl_outside in interface outside

access-group acl_dmz in interface dmz

Will this work and is it supported?

Thanks in advance,

Eric

1 REPLY
Bronze

Re: multiple static entries to same internal host?

that's possible also you can use the below static to prevent translation between inside and dmz (literally speaking)

static (inside,dmz) 1.1.1.1 1.1.1.1 netmask 255.255.255.255

146
Views
0
Helpful
1
Replies