Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multiple static mappings

Is it possible (and allowed) to have two static mappings to a single IP address?

Example:

host on inside is 192.168.1.100

DMZ has a host 10.0.100.3

available public IP is 61.1.1.1

available public IP is 61.1.1.2

Is it possible to do a static (inside, outside) 61.1.1.1 192.168.1.100

AND

static (inside, DMZ) 10.0.100.3 192.168.1.100

The scenario is that we need port 5000 open to the Internet on the inside host 192.168.1.100. We also need the DMZ server 10.0.100.3 to be able to communicate through the inside interface to 192.168.1.100 on port 5000.

Thanks!

  • Other Security Subjects
1 REPLY

Re: Multiple static mappings

Yes, the above scenerio is perfectly fine on the PIX.

Scott

89
Views
3
Helpful
1
Replies
This widget could not be displayed.