Multiple VPN Client connections from small offices to central vpn concentra
i am using cisco adsl router 827 with NAT in my small office , i like to have all users be able to use vpn client 3.6.3 or above to connect to my central office where my vpn 3000 series concentrator is(NAT transparency enable) .
But It seems that if one person starts a connection, other people in the office cannot.
Is there anything i miss in the router configuration .
ip address x.x.x.x 255.255.255.0
ip nat inside
ip address negotiated
ip nat outside
ppp pap sent-usernamexxxxxxx
ip route 0.0.0.0 0.0.0.0 dialer 0
ip nat inside source list 1 interface dialer0 overload
Re: Multiple VPN Client connections from small offices to centra
First change the router ACL wildcard mask to 0.0.0.255
Then check on the conc to ensure that IPSec over UDP is enabled for the group. It's on by default on the VPN Client, but must be enabled on both in order to work.
Give that a go.
Just out of interest, do you have any restrictions on setting up the 827 as the VPN peer? That'll be better than using SW Client, unless of course you want per user authentication for accounting purposes.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...