We are about to embark on an MPLS rollout (in a hub and spoke configuration - all remote offices will connect to the main office for Internet). We have about 1400 users. Which NAC solution would be right for us: 3 500 user servers or 1 1500 user server?
Thanks for your reply. I would like to keep it centralized to keep the cost down. I was considering the 3350, but our vendor was worried about the throughput between the NAC device and our Core switch (it's only 1Gbps). I don't want to create any bottleneck issues.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...