Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

NAT Easy-VPN traffic between 871 and ASA?

All, I'm trying to build a VPN Tunnel using EZVPN on an 871 to my ASA5520. That's the easy part (relatively speaking).

The problem is, I have an overlapping network already established on the ASA, so I need to NAT EZVPN traffic on the 871.

Doing it on the ASA is fairly easy, but I do not know how to do it over an EZVPN client?? Any guidance?

(Fake networks)

871 Remote network = 192.168.0.0/24

ASA Local network = 10.10.10.0/24

I see the vpnclient has a couple of options, but I cannot find any examples and very little documentation, and not sure it's what I need.

Has anyone done this, or have any docs/tut's in their library that explains it?

Thanks so much!

1 REPLY

Re: NAT Easy-VPN traffic between 871 and ASA?

Hi,

A good document:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/Easy_VPN_TDM-draft12_edited_AN.pdf

NAT is discussed starting page 29.

Please rate if this helped.

Regards,

Daniel

134
Views
3
Helpful
1
Replies
CreatePlease to create content