Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NAT'ing LAN to LAN tunnels on a 3000 concentrator.

Is it possible to NAT source addresses on packets from LAN to LAN connections with the 3000 concentrator?

1 REPLY
Cisco Employee

Re: NAT'ing LAN to LAN tunnels on a 3000 concentrator.

Its not possible to do Static NAT (Network address translation) on the VPN Concentrator (VPN3000), for that we will need a Router or PIX sitting on the inside of the VPN device.

This should get you going,

Hope this helps,

Aamir Waheed

Cisco Systems, Inc.

-=-=-

100
Views
0
Helpful
1
Replies
CreatePlease to create content